Phenol, 2-bromo-4-(trifluoromethyl)-
2-BROMO-4-(TRIFLUOROMETHYL)PHENOL
CAS: 81107-97-3
Molecular Formula: C7H4BrF3O
Phenol, 2-bromo-4-(trifluoromethyl)- - Names and Identifiers
| Name | 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL |
| Synonyms | BUTTPARK 180 7-84 2-Bromo-4-Trifluoromethylphenol 2-Bromo-4-(trifluoromethyl)phenol 3-Bromo-4-hydroxybenzotrifluoride 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL Phenol, 2-bromo-4-(trifluoromethyl)- 2-Bromo-4-(trifluoromethyl)phenol, 2-Bromo-alpha,alpha,alpha-trifluoro-p-cresol |
| CAS | 81107-97-3 |
| InChI | InChI=1/C7H4BrF3O/c8-5-3-4(7(9,10)11)1-2-6(5)12/h1-3,12H |
Phenol, 2-bromo-4-(trifluoromethyl)- - Physico-chemical Properties
| Molecular Formula | C7H4BrF3O |
| Molar Mass | 241.01 |
| Density | 1.752±0.06 g/cm3(Predicted) |
| Boling Point | 196.7±35.0 °C(Predicted) |
| Flash Point | 72.8°C |
| Vapor Presure | 0.28mmHg at 25°C |
| Appearance | Liquid |
| Color | Brown |
| Maximum wavelength(λmax) | 317nm(CH3CN)(lit.) |
| pKa | 7.03±0.18(Predicted) |
| Storage Condition | Inert atmosphere,Room Temperature |
| Refractive Index | 1.4960 to 1.5000 |
Phenol, 2-bromo-4-(trifluoromethyl)- - Introduction
2-BROMO-4-(TRIFLUOROMETHYL)PHENOL is an organic compound with the chemical formula C7H4BrF3O. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: Colorless to pale yellow crystalline solid.
-Melting point: about 50-55 degrees Celsius.
-Boiling point: 116-118 degrees Celsius at approximately 1mm Hg above sea level.
-Density: The density of the compound is 1.97 g/ml.
-Solubility: 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL has good solubility in organic solvents, but low solubility in water.
Use:
- 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL is widely used in organic synthesis reactions as a catalyst, intermediate or starting material.
-It can also be used as a raw material for fungicides, preservatives and flame retardants.
Preparation Method:
2-BROMO-4-(TRIFLUOROMETHYL)PHENOL is generally prepared by the following synthetic route:
-First, 4-trifluoromethylphenol is reacted with bromine in the corresponding solvent to obtain 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL.
-The reaction needs to be carried out at an appropriate temperature and reaction time, and the yield and purity can be adjusted according to the experimental conditions.
Safety Information:
- 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL should be careful to comply with the general safe practice of chemicals during storage and handling.
-It may cause irritation to the eyes, skin and respiratory tract, so direct contact should be avoided when using.
-It should be used in a well-ventilated area with appropriate personal protective equipment, such as gloves, safety glasses and protective masks.
-Avoid dust and particulate matter when handling or handling the compound.
-If not handled correctly, 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL may cause harm to the environment, so it must be handled and disposed of in accordance with relevant regulations after treatment.
Nature:
-Appearance: Colorless to pale yellow crystalline solid.
-Melting point: about 50-55 degrees Celsius.
-Boiling point: 116-118 degrees Celsius at approximately 1mm Hg above sea level.
-Density: The density of the compound is 1.97 g/ml.
-Solubility: 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL has good solubility in organic solvents, but low solubility in water.
Use:
- 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL is widely used in organic synthesis reactions as a catalyst, intermediate or starting material.
-It can also be used as a raw material for fungicides, preservatives and flame retardants.
Preparation Method:
2-BROMO-4-(TRIFLUOROMETHYL)PHENOL is generally prepared by the following synthetic route:
-First, 4-trifluoromethylphenol is reacted with bromine in the corresponding solvent to obtain 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL.
-The reaction needs to be carried out at an appropriate temperature and reaction time, and the yield and purity can be adjusted according to the experimental conditions.
Safety Information:
- 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL should be careful to comply with the general safe practice of chemicals during storage and handling.
-It may cause irritation to the eyes, skin and respiratory tract, so direct contact should be avoided when using.
-It should be used in a well-ventilated area with appropriate personal protective equipment, such as gloves, safety glasses and protective masks.
-Avoid dust and particulate matter when handling or handling the compound.
-If not handled correctly, 2-BROMO-4-(TRIFLUOROMETHYL)PHENOL may cause harm to the environment, so it must be handled and disposed of in accordance with relevant regulations after treatment.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: 2-Bromo-4-(Trifluoromethyl)Phenol Visit Supplier Webpage Request for quotation
CAS: 81107-97-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 81107-97-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 2-Bromo-4-Trifluoromethylphenol Request for quotation
CAS: 81107-97-3
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
CAS: 81107-97-3
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
Product Name: 2-Bromo-4-(Trifluoromethyl)Phenol Visit Supplier Webpage Request for quotation
CAS: 81107-97-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 81107-97-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 2-Bromo-4-Trifluoromethylphenol Request for quotation
CAS: 81107-97-3
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
CAS: 81107-97-3
Tel: 0086-13605431940
Email: xuli678323@126.com
Mobile: +86-13605431940
QQ: 56860987
Wechat: 13605431940
WhatsApp: 13605431940
View History